1) Storage temperature
Under normal circumstances, at room temperature ventilation can be. Of course, conditional, storage temperatures below 25 ° C, preferably below 15 ° C. When the temperature exceeds 25 ° C, some form of damage may accelerate, thereby shortening the shelf life. The temperature is too low and the seal will harden. Be wary of permanent deformation and damage during extrusion, bending, brittle, and brittle. Therefore, the storage temperature can not be lower than -15 ℃. When the seal is removed from the use of low temperature, the temperature should be raised to 30 ℃ when used.
2) Humidity
Storage should avoid moisture, the average humidity of not more than 65%. There shall be no condensate on any of the seals.
3) light
To avoid light, especially the high content of ultraviolet light. The seal can be sealed in the polyethylene plastic bag, placed in a cool and ventilated place. Packaging should not use PVC material.
4) use and distribution
Seals should be stored separately. Different rubber packaging separately, different specifications of the sealed sub-grid. Pay attention to the order issued by the use of manufacturing, so as to avoid the inventory over the validity period. Seals should be placed in a smooth place, to avoid stretching, compression, twisting or by other forces. Do not put the seals stacked, hanging, so as to avoid permanent deformation.
5) Do not contact semi-solid materials
Seals are not allowed to come into contact with solvents, oils, greases and other semi-solid materials during the storage of the seals, and are not susceptible to metal or nonmetallic materials such as copper, copper alloys, manganese, iron and some Secretory resin such as wood contact.
6) performance check
Stored for a period of time the seal, the use of the shape should be checked before the size and compound properties. Fail to meet the requirements, not use.
7) cleaning
Packaging sealed seals, the use of soapy water or methanol can be modified with alcohol, dry at room temperature. Do not dip in gasoline, do not dry on the heat or dry with a fan. Save the seal, can extend the life cycle.